Saturday, January 12, 2008
Damn, another year. No wonder thing isn't on the road yet.
Its been almost a year since I updated this blog...
I have been working on the new wiring harness lately. That's the project of the month. Currently, the harness is in place and the rear section is in place. I've wired up the new shiny instrument panel and its almost ready to go in. But first there are a few lost wires to find and some questions to ask of the folks at Mid-Fifty's.
In the process of wiring up the brake light switch I discovered that the Brake On/Off (BOO) input to the ECC was not routed through the Crown Vic harness. The BOO come from the back switch so I'll have to route it. In the process, I also found that the wiring diagram is totally wrong for connector B45B...anyway, I can work around it. It does contain the BOO circuit though.
I have been working on the new wiring harness lately. That's the project of the month. Currently, the harness is in place and the rear section is in place. I've wired up the new shiny instrument panel and its almost ready to go in. But first there are a few lost wires to find and some questions to ask of the folks at Mid-Fifty's.
In the process of wiring up the brake light switch I discovered that the Brake On/Off (BOO) input to the ECC was not routed through the Crown Vic harness. The BOO come from the back switch so I'll have to route it. In the process, I also found that the wiring diagram is totally wrong for connector B45B...anyway, I can work around it. It does contain the BOO circuit though.
